Omron releases PLC-Based CJ position controllers
March 10, 2009 - Position Controllers from Omron Electronics use a high-speed motion network to provide high precision control of 2, 4 and 16 axes to meet the growing need for fast throughput with reduced waste. The position controllers pair efficiently with Omron's GN-Series servo drives and G-Series motors, and are compatible with a range of programmable controller platforms for a scalable solution.
Designed for Omron's CJ and CS PLC platforms, the CJ position controllers can be paired with the micro CP1H controller for 2- and 4-axis standalone applications on a small machine or combined with CJ1, CJ2 or CS1 controllers for high-speed, high I/O count applications used on a full production line. The motion network reduces the total cost of ownership by simplifying operation, reducing wiring, offering centralized setup and single point access monitoring, and lowering the upfront hardware and software costs.
The position controllers store parameters in the module, not the CPU, to ensure fast network access without affecting the scan cycle and maintaining high throughput. The motion control bus enables individual GN Servo drives (with Motion Network capabilities) to link to the Position Controller using a single cable (2-core shielded twisted pair cable) in a daisy-chain configuration rather than the more costly direct wiring of a separate controller connection for each drive. This minimizes wiring, simplifies troubleshooting and allows easy system architecture expansion to include additional axes.
Both the controller and individual servo drives are programmed using Omron’s CX-One automation software suite which saves time and also ensures simple integration within the system. Not sold piecemeal in application modules, but as one value-priced package, Omron’s CX-One contains applications to configure and program all PLCs, Motion controllers, HMIs, Temperature controllers and Field bus networks. Extensive simulation capabilities and support for all five IEC 61131-3 programming languages are included in the standard CX-One suite.
Omron offers the new Position Controllers with motion network interface in 2-, 4- and 16-axis modules for the CJ and CS controller platforms. They provide a solution for simply automating applications in packaging, assembly, material handling and manufacturing operations where quick, precise, cost-effective positioning is required.
Designed for Omron's CJ and CS PLC platforms, the CJ position controllers can be paired with the micro CP1H controller for 2- and 4-axis standalone applications on a small machine or combined with CJ1, CJ2 or CS1 controllers for high-speed, high I/O count applications used on a full production line. The motion network reduces the total cost of ownership by simplifying operation, reducing wiring, offering centralized setup and single point access monitoring, and lowering the upfront hardware and software costs.
The position controllers store parameters in the module, not the CPU, to ensure fast network access without affecting the scan cycle and maintaining high throughput. The motion control bus enables individual GN Servo drives (with Motion Network capabilities) to link to the Position Controller using a single cable (2-core shielded twisted pair cable) in a daisy-chain configuration rather than the more costly direct wiring of a separate controller connection for each drive. This minimizes wiring, simplifies troubleshooting and allows easy system architecture expansion to include additional axes.
Both the controller and individual servo drives are programmed using Omron’s CX-One automation software suite which saves time and also ensures simple integration within the system. Not sold piecemeal in application modules, but as one value-priced package, Omron’s CX-One contains applications to configure and program all PLCs, Motion controllers, HMIs, Temperature controllers and Field bus networks. Extensive simulation capabilities and support for all five IEC 61131-3 programming languages are included in the standard CX-One suite.
Omron offers the new Position Controllers with motion network interface in 2-, 4- and 16-axis modules for the CJ and CS controller platforms. They provide a solution for simply automating applications in packaging, assembly, material handling and manufacturing operations where quick, precise, cost-effective positioning is required.
聲明：本網站所收集的部分公開資料來源于互聯網诉拔，轉載的目的在于傳遞更多信息及用于網絡分享，并不代表本站贊同其觀點和對其真實性負責，也不構成任何其他建議壮虫。本站部分作品是由網友自主投稿和發布、編輯整理上傳环础，對此類作品本站僅提供交流平臺囚似，不為其版權負責。如果您發現網站上所用視頻岗翔、圖片幌蹈、文字如涉及作品版權問題，請第一時間告知擂益，我們將根據您提供的證明材料確認版權并按國家標準支付稿酬或立即刪除內容剖冒，以保證您的權益！聯系電話：010-58612588 或 Email:editor@mmsonline.com.cn翻妆。
網友評論
匿名:
最新反饋
注冊獲取更多行業信息
- 暫無反饋
無須注冊，輕松溝通