Omron enhances CX-One PLC software
September 01, 2009 - The CX-One comprehensive software package from Omron Electronics LLC integrates PLC programming software with support software for setting up networks, operator interface HMIs, servo systems, inverters, and temperature controllers.
Version 3.2 expands the communications networks supported by adding EtherNet/IP, CompoNet and PROFINET. Recently introduced Omron automation products now supported by CX-One include the CJ2H-CPU programmable automation controller, NS15 ultra-crisp 15-inch HMI, and PLC-based high-speed position controller modules for CJ and CS platforms. Industry standard, tag-based programming using CJ2H-CPU via Ethernet/IP helps shorten program development time and troubleshooting. CX-One helps meet the market demand for fast additions and changes in production models, volumes and line compositions after the equipment is in operation, and supports traceability and other global requirements for quality, safety and environmental needs.
Advances in CX-One V3 enable programmers to use IEC61131-3 programming languages, including Sequential Function Chart and Structured Text. Separate language modules are not required.
The simulation application eliminates the need to have PLC and HMI hardware connected to develop and debug programs, and it integrates the operations of devices for accurate error simulation without having to test each separately. Integrated simulation can be started from either CX-Programmer or CX-Designer to clearly simulate the interaction between HMI and PLC programs. System errors are easily checked and debugged directly from CX-One, reducing downtime during the “off-line” test phase. Operations can be saved in CSV files when errors occur to simplify test report generation.
In deploying networks, CX-One uses just one connection to reduce network design time. The process of setting up routing tables has been greatly simplified as they can now be set and transferred by routing them from one location to all the PLCs on a network of the same layer. With just an Ethernet connection it is now possible to download the routing tables to all the PLCs connected to the network. This greatly reduces the complexity of the configuration and allows automation systems to be programmed or configured with minimal training.
Data can be backed up, compared and restored for all PLC units or specific PLC units at the target PLC. This provides powerful support for data management for the entire PLC system. Downtime in emergencies is also minimized. Easier and safer Support Software connections to PLCs are possible using PLC name verification to prevent incorrect connections. Tags can be used with CJ2 CPU units to access data through EtherNet/IP using an NS-series HMI. Design modifications are easier because address changes at the PLC normally can be made without affecting the rest of the system.
CX-One V3 supports Windows Vista, the latest Microsoft operating system, enabling it to be used on the very latest computers. Machinery can be developed for use worldwide with CX-One. The CX-Designer HMI application supports 42 languages, including Asian languages.
Version 3.2 expands the communications networks supported by adding EtherNet/IP, CompoNet and PROFINET. Recently introduced Omron automation products now supported by CX-One include the CJ2H-CPU programmable automation controller, NS15 ultra-crisp 15-inch HMI, and PLC-based high-speed position controller modules for CJ and CS platforms. Industry standard, tag-based programming using CJ2H-CPU via Ethernet/IP helps shorten program development time and troubleshooting. CX-One helps meet the market demand for fast additions and changes in production models, volumes and line compositions after the equipment is in operation, and supports traceability and other global requirements for quality, safety and environmental needs.
Advances in CX-One V3 enable programmers to use IEC61131-3 programming languages, including Sequential Function Chart and Structured Text. Separate language modules are not required.
The simulation application eliminates the need to have PLC and HMI hardware connected to develop and debug programs, and it integrates the operations of devices for accurate error simulation without having to test each separately. Integrated simulation can be started from either CX-Programmer or CX-Designer to clearly simulate the interaction between HMI and PLC programs. System errors are easily checked and debugged directly from CX-One, reducing downtime during the “off-line” test phase. Operations can be saved in CSV files when errors occur to simplify test report generation.
In deploying networks, CX-One uses just one connection to reduce network design time. The process of setting up routing tables has been greatly simplified as they can now be set and transferred by routing them from one location to all the PLCs on a network of the same layer. With just an Ethernet connection it is now possible to download the routing tables to all the PLCs connected to the network. This greatly reduces the complexity of the configuration and allows automation systems to be programmed or configured with minimal training.
Data can be backed up, compared and restored for all PLC units or specific PLC units at the target PLC. This provides powerful support for data management for the entire PLC system. Downtime in emergencies is also minimized. Easier and safer Support Software connections to PLCs are possible using PLC name verification to prevent incorrect connections. Tags can be used with CJ2 CPU units to access data through EtherNet/IP using an NS-series HMI. Design modifications are easier because address changes at the PLC normally can be made without affecting the rest of the system.
CX-One V3 supports Windows Vista, the latest Microsoft operating system, enabling it to be used on the very latest computers. Machinery can be developed for use worldwide with CX-One. The CX-Designer HMI application supports 42 languages, including Asian languages.
聲明：本網站所收集的部分公開資料來源于互聯網，轉載的目的在于傳遞更多信息及用于網絡分享颂梆，并不代表本站贊同其觀點和對其真實性負責令久，也不構成任何其他建議。本站部分作品是由網友自主投稿和發布涣累、編輯整理上傳隆鹤，對此類作品本站僅提供交流平臺，不為其版權負責蹦争。如果您發現網站上所用視頻汪请、圖片、文字如涉及作品版權問題瑞捂，請第一時間告知贸左，我們將根據您提供的證明材料確認版權并按國家標準支付稿酬或立即刪除內容，以保證您的權益酷麦！聯系電話：010-58612588 或 Email:editor@mmsonline.com.cn矿卑。
網友評論
匿名:
最新反饋
注冊獲取更多行業信息
- 暫無反饋
無須注冊脚牍，輕松溝通
編輯推薦
- 2025新年特刊：打造新質生產力巢墅，智啟未來新篇章
- 定義制造業未來的數控加工中心技術專題
- 航空航天及交通領域先進制造技術應用專題
- 解碼消費電子產品生產的數字化之路技術專題
- 精密智能機床，助力制造升級技術專題
- 汽車輕量化驅動下的零部件加工應用專題
- 高性能銑刀實現高精加工生產技術專題
- 航空航天發動機解決方案專題
- 高效齒輪加工生產技術方案專題
- 金屬加工液的性能不止?jié)櫥夹g(shù)應用專題