CALL FOR PROPOSAL

If your company would like to join this research project, please contact the project coordinator info (at) (暫不可見)

DRAFT PRE-PROPOSAL

Aim of the project is to facilitate use of face gears in aviation industry, through a new cost-effective manufacturing technology, based on shaping technology with a special software on CNC horizontal shaping machine

State of the art: face gears vs. bevel gears

Face gears have been known and studied for many years, and have been extensively used for low power and low speed. With the advent of high  torque and speed requirements, face gears have been driven out by conventional bevel gears, which are easier to be manufactured.

Advantages of face gears for aircraft applications

Face gears can have important applications in transmissions of helicopters, especially  for two reasons:

1. the face gear coupling proved to be effective also with insufficient lubrication, thus increasing the reliability of the aircraft

2. the face gear coupling works also with imperfect misalignment between pinion and the rotor gear

In case of damage of the gearbox, helicopters using transmission systems based on face gears have thus a higher safety and survivability.

General advantages of face gears

Face gears have some other natural advantages, compared to bevel gears, such as following:

1.the pinion is a normal spur gear which axial position has no influence on the meshing zone provided its face is adequate

2.assembly time is reduced because only the axial position of the face gears needs to be set

3.Lapping is not necessary because all gears irrespective of their tooth numbers or shaft angles may be interchangeably meshed with the common pinion upon which the particular generating hob geometry is based

4.There is no axial load on a pinion with straight spur teeth

5.The meshing is smoother due to oblique contact lines and high contact ratio

6.Face gears provide high transmission ratios in one stage

(暫不可見)st effective manufacture on conventional CNC gear hobbing machines straddle mounted pinions, provided that the calculation is correct

8.Zero backlash transmission for positioning or measuring machines can be easily obtained

9.Face gears have high strength teeth and good contact geometry, which give high torque capability

Actual application in military aircrafts

Facegears are used in military helicopters, where higher manufacturing costs are driven out by need of helicopter reliability and survivability. As far as we know, face gears are not used on civil helicopters.

Potential benefits for partners

All the partners are involved in gear technology design (Feanor), gear manufacturing (A) and gear measuring (B), and will have benefit if the project will be completed.

Potential benefit for user of the new technology

Importance of face gears on aviation industry has been pointed out here, but all manufacturers of gearboxes and transmission are potentially interested in the possible applications of face gears (in automotive, building, steel processing, mills and wind-mills, …) if this technology will be succesful. It is impossible to evaluate impact on all these areas, but it is certainly impressive.

聲明：本網站所收集的部分公開資料來源于互聯網艺演，轉載的目的在于傳遞更多信息及用于網絡分享实牡，并不代表本站贊同其觀點和對其真實性負責斋荞，也不構成任何其他建議荞雏。本站部分作品是由網友自主投稿和發布、編輯整理上傳平酿，對此類作品本站僅提供交流平臺凤优，不為其版權負責。如果您發現網站上所用視頻蜈彼、圖片筑辨、文字如涉及作品版權問題，請第一時間告知究油，我們將根據您提供的證明材料確認版權并按國家標準支付稿酬或立即刪除內容殊精，以保證您的權益！聯系電話：010-58612588 或 Email:editor@mmsonline.com.cn迹匈。