Update of ZEISS ULM  length measurement machines with QMSOFT

Keywords: length calibration machines, ZEISS ULM, Microrep, Heidenhain, aus Jena, update, calibration of gauges, thread rings and gauges, software for calibration, update of older length calibration machines

Author: Luca Bochese, FEANOR Italy-Estonia, QQ 873993643
Date: 2008-06-25
用QMSOFT 更新ZEISS ULM 長度測量儀器

作者： Luca Bochese 柑潦， feanor愛沙尼亞绊含， QQ： 873993643
日期： 2008年7月22日

Feanor is a global company performing applied research and providing services in metrology and measurement instruments since 1990. The information contained in this article is useful for all users of older ZEISS length measurement machines, including calibration laboratories, which need to update the software for the management of their measuring instruments. 

　　芬諾FEANOR是一個全球性的公司必尼，創立于1990年，進行應用研究和提供計量和測量儀器的服務抒倚。本文所述技術信息對所有ZEISS ULM長度測量儀器的老客戶很有益處褐着，包括校準實驗室，它需要更新軟件管理自己的測量儀器托呕。

The ease of use and the impressive number of standards included in QMSOFT offers advantages such as fast and custom calibration of dial gauges, accurate calibration of thread rings using T probes and a three point contact (instead of two, as normally performed with these machines) by positioning the thread ring with a vertical axis, no need of paper, e-calibration services and database sharing with customers, and many others. The company which installed this system can now save about 35.000 EUR per year, this being the cost for calibration of thread rings by an external calibration laboratory.

　　它使用方便含蓉，在QMSOFT中有數目可觀的標準，它的優勢體現在镣陕，比如谴餐，快速和自定義的標定撥號計，精確標定螺紋環呆抑，用T探頭和 3點接觸（而不是兩個，像通常的機器那樣）通過垂直軸定位螺紋環汁展，無需紙張鹊碍，提供電子校正服務和數據庫與客戶共享服務，和許多其他服務食绿。該公司安裝這個 系統現在可以節省約35.000歐元每年侈咕，相當于一個由外部校準實驗室校準螺紋環提供的成本。

 
Picture 1: Older ZEISS ULM length measuring machine can now be transformed into a fast and efficient length calibration machine with the powerful options of QMSOFT gauge management software
圖片1 ：舊版的ZEISS ULM 長度測量儀器現在可以轉化為一種快速有效的長度校準機通過選擇強大的QMSOFT衡量管理軟件

The main advantages of QMSOFT gauge management software:
? Fast operation and ease of use
? Complete and updated standards
? Calibration of thread gauges with 3 probe procedure (more accurate) and Berndt or vectorial evaluation formulas

? QMSOFT衡量管理軟件的主要優點：
?運作快速和使用簡單
?完整和更新的標準
?校準螺紋壓力表與三探針程序（更準確）和Berndt或矢量評價公式

Conversion of the original Zeiss measuring system
Using a special interface-box, it is now possible to connect directly the original Zeiss measuring system of the ‘a(chǎn)us Jena’ machine to a modern Heidenhain IK220 card (PCI card with two sockets).

　　原ZEISS測量系統轉換使用一個特殊的界面中屏酌，現在有可能直接連接原ZEISS測量系統'‘a(chǎn)us Jena '機到現代海德漢IK220卡（ PCI卡用兩個插座） 庇讥。

Note: Older computers used an IK 121 card on ISA bus, when required, it is still possible although not suggested, to use a IK 121 card on ISA bus and QMSOFT16 bit version. In that case, the card is not automatically recognized by the OS, and is therefore necessary to check PIN address 320, 330,340 or 350 and enter this information in the QMSOFT glass scale setting options, as well as the glass scale resolution in 20 or 8 μm.

注：老式的電腦，一IK的121卡ISA總線予问，在需要時润沸，它仍有可能，雖然沒有建議涕笛，使用IK的121卡ISA總線和qmsoft16位元版本燥箍。在 這種情況下都宅，該卡是不會自動承認的操作系統，因此朦晋，有必要檢查引腳地址320 愧橄， 350或330340 ，并輸入此信息周狱，在qmsoft玻璃規模設定選項瘪期，以及作為玻璃規模決議在20年或8 μm。

This solution with IK220 PCI allows the use of both versions of  QMSOFT 16 bit and QMSOFT 32 bit, without the need of using the original AE101 (H or L) display unit.
The information previously displayed on Zeiss AE101 interface (MIN, MAX, NEG, SET, …) is now displayed directly on the PC monitor.

　　這個用ik220PCI的解決方案允許使用兩個版本的QMSOFT 16位和32位稿辙，而不需要使用原來的ae101 （ h或升）顯示單元缓苛。

　　以前僅顯示在AE101接口的資料（Min，Max邓深，NEG未桥，SET … … ）現在可以直接顯示在PC監視器上。

Picture 2: The original Feinmess AE 101 Interface is no longer needed, when connecting the measuring machine to the Heidenhain PCI counter card. The functions of the display are then performed by the QMSOFT display software.

圖片2 ：原Feinmess AE 101接口芥备，就不再需要了冬耿，當把測量儀器和海德漢的PCI卡連接起來時。職能展示是由QMSOFT顯示軟件完成的萌壳。

Conversion Interface box
The cable of the aus Jena ZEISS ULM machine is connected to a special interface box, which is then connected to the IK220 in the PC slot.
When installing the drivers, with different procedures according to Windows 2000, XP or Vista, the IK220 card address will be automatically recognized (no pin setting).
The original signal is converted and displayed, the only required setting are the setup of the measurement channel (normally nr. 1) and the glass scale resolution in 20, 10, 8 or 2 μm. This can be easily performed by measuring a 10 mm block gauge.

轉換接口箱
aus Jena ZEISS ULM的網線 是連接到一個特別的接口框亦镶，然后連接到ik220電腦插槽。
安裝驅動時袱瓮，根據Windows 2000 缤骨， XP或Vista不同的程序 ， ik220卡地址將被自動識別（無引腳設置） 尺借。
原始信號的轉換和顯示绊起，只需要設置安裝的測量通道（通常年nr. 1 ）和玻璃度量分辨率在20 ， 10 燎斩， 8或2 μ m箩晦。
這可以很容易的通過測量一10毫米的儀表來展示。

Measurement pressure
This system can be easily applied to all machines with mechanical presetting of measuring force (spring or deadweight). For all machines with force presetting via software, it might be necessary to keep the machine management software in background. This happens, as an example, with SIP Genevoise series 550 M machines, which need their own LMC software running in background.

壓力測量
　　這個系統可以很容易地適用于所有的帶有測量力的機械預先裝置（彈簧或是重量）機器树吏。對所有通過軟件預置力的機器 淀甘，可能有必要把機器管理軟件保持在背景下。這種情況下漫介，作為一個例子风镊，與SIP的genevoise一系列550m機器，需要他們自己的LMC運行的軟件的背景赏碑。

Temperature compensation
Drivers for most temperature sensors are included. A general RS232 setting option allows connection of other sensors, if required by unstable environment condition (which should generally be avoided).

溫度補償
　　對于大多數溫度傳感器满颂，驅動均包括在內。一般的RS232設置選項允許連接其他傳感器，如有需要铁厌，如果不穩定的環境條件需要的話（一般應避免） 褂苔。

Calibration of dial gauges
Calibration of all types dial gauges can be performed very quickly and easily. All included standards (US and European standards, including also Japanese, Korean and Australian) are given at the end of this article

撥號壓力表校準
　　校準所有類型的撥號壓力表可以非常迅速和容易的執行。所有列入標準（美國和歐洲的標準惹模，其中還包括日本贩贵，韓國和澳大利亞） ，均在本文章最后呈現灵妨。

The basic QMSOFT display contains all needed functions for calibration of different types of gauges
基本的QMSOFT 顯示包含所有需要的功能來校準不同類型的壓力表解阅。

Example of calculation of parameters of thread standard values (minimum, maximum, wear or external, mean an internal diameter) , for a metric M10 thread plug gauge, pitch 1.5 mm, tolerance class 6H, according to DIN German standard

　　例如計算參數的螺紋標準值（最低，最高泌霍，磨損或外部货抄，是指一個內部直徑） ，為M10的公制螺紋塞規朱转，螺距1.5毫米蟹地，寬容級6小時，按照DIN德國標準
 

In this example, two measurement at 0° and 90° are performed on a 10.410 mm plain plug gauge, on two different sections of the gauge, by the three wire method
在這個例子中藤为，兩種測量在0 °和90 °是在一個10.410mm平原塞規怪与，由三線的方法，在兩個不同的部分規范缅疟。

QMSOFT - 軟件技術實現對檢定和校準的過程控制

Software for management and calibration of measurement instruments, including updated international standards
軟件管理和校準測量儀器分别，其中包括最新的國際標準

The main shell of QMSOFT is divided in four sections: left for the measuring modules (inspection programs) for different types of instruments to be calibrated, the database, the calibration devices used, and other software tools
QMSOFT的主體分為四個部分：左為測量模塊（檢驗程序） ，為不同類型的儀器進行校正存淫，數據庫耘斩，標定設備使用，和其他的軟件工具

QMSOFT can be used with all length measuring instruments, including following well-known models from different manufacturers:
這個軟件可以用在所有長度測量儀器游隅，其中包括：

? SIP - 300, 300M, 550M, 750M
? Brown&Sharpe TESA - TESA UPC, Etalon POLO
? Mahr Federal - 828a, 828 PC, 828 UN, Optimar 100, Millitron 1240 e 1501IC, PLM 600
? Zeiss aus Jena - ULM 600 (AE1IH/Heidenhain), ULM Opal 600, Opal 1000
? Steinmeyer Feinmess Suhl - KLM-60.01, LM-300.01, UMP-2, EMP-II
? Trimos - TULM RS232/Heidenhain, THV mini, LabConcept, TELMA, TELA
? Pratt & Whitney - Supermicrometer, P&W Labmaster
? Sylvac - Dial gauge calibrator, D 80, D 100, Opto RS
? Helios - Com, Unitron, Com Supra, Linear, UMG 50
? Microrep - DMS 680
? Cary - Carylabor

QMSOFT has many different modules, which allow high flexibility and possibility to adapt to your calibration requirements:
QMSOFT 有很多不同的模塊圈喻，靈活性高，適應性強唆皇，可適合你的校準要求梨浑。

1. Gauge database DABAQ4W (command shell). Gauge management
DABAQ4W 軟件技術實現對檢定和校準的過程控制
 

The database screen indicates which gauges or instruments need to be calibrated and gives their basic parameters. The database is fully customizable and can be used to define the structure of any type of new measuring device (electrical, force, torque, temperature, torque, pressure,…)

　　數據庫的屏幕顯示，其中壓力表或儀器需要加以校準并給出了他們的基本參數吨肆。該數據庫是完全自定義，可以用來界定結構芙捏，界定任何類型的新的測量裝置（電氣劳仿，力矩，扭矩粤唤，溫度甜海，扭矩，壓力预锅， … … ）

2. LEHRM4W for calibration of plain rings, plug gages and snap gages according to following standards:
LEHRM4W 校準片面環饵来，插頭片恢恼，根據以下標準：

- DIN ISO 286 – 1環規德國標準
- DIN ISO 286 – 2環規德國標準
- British standard BS 969 -環規英國標準
- ANSI/ASME B89.1.6M - 1984 -環規英國標準
- Norme Fran?aise NF E 02-202 (GE40-001N) -環規法國標準
- Master Rings BS 4064:1966 and BS 4065:1966  環規英國標準
- Master Rings Norme Fran?aise NF E 11-011環規法國標準

Screen for plain gages selection

3. GEWIND4W for calibration of thread gages and rings according to following standards.
GEWIND4W 為校準線片及環，根據以下標準：

- ISO Metric threads ISO DIN ISO 1502 (DIN 13) 國際標準化組織公制螺紋
- ISO Metric threads ANSI B.1.16M ANSI標準化組織公制螺紋
- Trapezoidal ISO metric threads DIN 103  梯形國際標準化組織度量 線程
- Unified threads and thread gages ANSI ASME B1.1 and B 1.2 標準
- Thread Gauges for Unified threads BS 919 標準
- Gauges for pipe threads DIN ISO 228 國際標準化組織計管螺紋
- Steel conduit threads DIN 40430, DIN 40431 標準
- Knuckle threads (Rundgewinde) - DIN 405標準
- Buttress threads and gauges (S?gegewinde), DIN 513 and factory standard
- Gauges for wire thread inserts for metric threads, DIN 8140 標準
- Gages for threads Whitworth BS 84 / BS 919 part 2
- NPSM pipe threads, ANSI/ASME 1.20.1
- Aerospace MJ Threads, DIN ISO 5855 - 對于應用在航天
- Gauges for Metric and Unified threads B?llhof factory standard
- Threads for valves and tires DIN 7756 and ETRTO V.7
- Metric threads NF E 03-152/163 (GE40-010N)
- Unified threads CNOMO GE40-008N (PSA, Renault) 法國標準
- ACME threads ANSI B1.5 – 1988 標準
- Stub-ACME threads ANSI B1.8 – 1988 標準
- Buttress threads 7°/45°, ANSI B1.9 – 1973 標準
- Hot-dip galvanized threads DIN ISO 965:2002 標準

4. MESSF4W for calibration of dial gauges, precision dial gauges and test dial indicators according to following standards:
MESSF4W 標定撥號儀表 (百分表千分表系列), 精密撥號儀表和測試撥號指標按以下標準：

- Dial gauges DIN 878 - 1973 德國標準
- Precision dial gauges DIN 879 - 1999  德國標準
- Dial test indicators DIN 2270 - 1985  德國標準
- Precision dial gauges ASME/ANSI B89.1.10M - 1987
- Dial gauges Norme fran?aise NF E 011-50 法國標準
- Dial test indicators Norme fran?aise XP E 11-053 : 2000 法國標準
- Dial gauges Japanese industrial standard JIS B 7503 - 1992 日本標準
- Dial gauges British standard BS 907-1965 英國標準
- Dial test indicators British standard BS 2795-1981 英國標準
- Dial gauges and test dial indicators, Australian standard AS 2103 澳大利亞標準
- Dial gauges (0.01 mm) (Korean standard) KS B 5206-1984 韓國標準
- Dial gauges (0.001 mm) (Korean standard) KS B 5207-1984 韓國標準
- Test dial indicators (Korean standard) KS B 5238-1976 韓國標準

The main display screen for dial gauges is divided in three sections, for three different types of dial gauges

5. MESCHR4W for the calibration of outside and inside micrometers, micrometer heads according to following standards:
MESCHR4W 為標定的內部和外部微米 (千分尺系列), 微米元首根據以下標準
- Micrometers DIN 863 - 1999 (part 1-4)  德國標準
- Outside micrometers (British standard) BS 870-1950 英國標準
- Inside micrometers (British standard) BS 959-1950 英國標準
- Depth micrometers (British standard) BS 6468-1984 英國標準
- Micrometer heads (British standard) BS 1734-1951 英國標準
- Micrometers (any type) Federal Specification (USA) GGG-C105 C-1987
- External micrometers, Australian standard AS 2102 澳大利亞標準
- Internal micrometers, Australian standard AS 2101 : 1978 澳大利亞標準

MESCHR4W main screen, although such measuring instruments are normal   calibrated using a set of reference block gauges

6. MESCHI4W for calibration of vernier calipers, depth gauges according to following standards:
MESCHI4W 為太陽能卡尺標定游標卡鉗胰默，?數顯卡尺系列, ?游標卡尺系列, ?帶表卡尺系列, ?深度尺系列, ?數顯標尺系列 深度計场斑，根據以下標準：

- Vernier calipers DIN 862 - 1988 卡尺德國標準
- Vernier calipers (metric) Australian standard AS 1984 - 1977 澳大利亞標準
- Vernier calipers British standard BS 887 卡尺英國標準
- Vernier calipers (metric) Norme Fran?aise NF E 11-091 法國標準

7. MESZTA4W for calibration of measuring tapes according to following standards:
MESZTA4W  校準測量錄音帶根據以下標準：
- Steel tapes DIN 865 and DIN 866 德國標準
- Steel tapes (British standard) BS 4372 英國標準

QMSOFT includes standards and procedures for calibration of following types of measuring instruments:
勤包括標準和程序校準下列類型的測量儀器:

卡尺
1 Absolute coolant proof caliper  防水防油數顯卡尺
2 Absolute Digimatic caliper  數顯卡尺
3 Absolute solar caliper 太陽能數顯卡尺
4 Vernier caliper  游標卡尺
5 diamond Master vernier caliper  鉆石形游標卡尺
6 dial caliper  帶表卡尺
7 digimatic caliper 數顯尖型夾鉗卡尺
8 vernier caliper  帶有拇指鎖緊裝置游標卡尺
9 digimatic carbon fiber caliper 數顯碳纖卡尺
10 long jaw vernier caliper  長爪游標卡尺
11 digimatic caliper  帶有尖型和標準型量爪數顯卡尺
12 Vernier caliper 帶有尖型和標準型量爪游標卡尺
13 offset caliper/offset centerline caliper  偏置卡尺/偏置中心線卡尺
14 point caliper 尖爪卡尺
15 blade type caliper  薄片游標卡尺
16 neck caliper/outside point caliper 頸套型游標卡尺/外點式游標卡尺
17 tube thickness caliper/swivel vernier caliper 管壁厚度卡尺
18 scribing caliper/digimatic snap caliper 劃線卡尺/數顯快速卡尺
19 back-jaw centerline caliper 背量爪式中心線卡尺
20 inside caliper 內徑卡尺
21 absolute low force caliper 低測力卡尺
22 hook type vernier caliper 卡鉗式游標卡尺
23 absolute digimatic depth gages 數顯深度尺
24 vernier depth gages/dial depth gages  （帶表）游標深度尺
25 extension bases/depth base attachment  加寬基面/深度基面附件
千分尺類:
1 Digimatic Micrometer 數顯千分尺
2 quickmike Quickmike快速測量千分尺
3 outside micrometer 外徑千分尺
4 quick-setting outside micrometers  快速設定型外徑千分尺
5 spine micrometers 齒槽（花鍵）千分尺
6 point micrometers 尖頭千分尺
7 Crimp Height Micrometers 夾鉗式高度千分尺
8 v-anvil micrometers V砧（三勾、五勾）千分尺
9 tube micrometers 管壁千分尺
10 universal micrometers 萬能千分尺
11 uni-mike “Uni-Mike”千分尺
12 sheet metal micrometers U型千分尺
13 balde micrometers 薄片千分尺
14 disk micrometers 盤式（公法線）千分尺
15 screw thread micrometers 螺紋千分尺
16 gear tooth micrometers 齒輪外徑千分尺
17 can seam micrometers 罐型接縫千分尺
18 hub micrometers 輪轂千分尺
19 digit outside micrometers 數字外徑千分尺
20 caliper type micrometers 卡尺型千分尺
21 digimatic micrometers  可調測力型數顯千分尺
22 low force micrometers/digimatic bench micrometer
低測力千分尺/數顯臺式千分尺
23 snap meters/dial snap meters  帶表千分尺（杠桿卡規）
24 indicating micrometers/outside micrometers  帶表千分尺
25 limit micrometers  極限千分尺
26 optical flats/optical parallels  平行平晶/平面平晶
27 micrometer standards/standards for screw thread micrometers 
（普通牵署、螺紋漏隐、V型測砧）千分尺校正桿
28  micrometer stands  千分尺尺座
29  groove micrometers  凹槽千分尺
30  depth micrometers 深度千分尺
31  borematic  孔徑千分尺
32  digimatic holtest  數顯三點內徑千分尺
33  holtest  三點內徑千分尺
34  inside micrometers  內徑千分尺
35  digimatic tubular inside micrometers  數顯接桿式內徑千分尺
36  tubular inside micrometers  接桿式內徑千分尺
37  micrometer heads  微分頭

表類:
1 IDF series digimatic indicators IDF系列數顯千分表/百分表
2 IDC series digimatic indicators IDC系列數顯千分表/百分表
3 IDS series digimatic indicators IDS系列數顯千分表/百分表
4 IDU series digimatic indicators IDU系列數顯千分表/百分表
5 LGS series digimatic indicators LGS系列數顯千分表/百分表
6 LGD,LGD-M Linear gages 光柵長度計
7 Dial indicators 1系列 1系列百分表/千分表
8 Dial indicators 2系列 2系列百分表/千分表
9 Dial indicators 3系列 3系列百分表/千分表
10 Dial indicators 4系列 4系列百分表/千分表
11 contact points  測頭
12 magnetic stands 磁性支架/測量臺
13 bore gages 內徑表
14 dial bore gages  （粗糙表面）內徑表
15 setting rings  環規
16 dial depth gages 深度表
17 thickness gages  厚度表
18 caliper gages  測徑器
19 dial test indicators  杠桿百分表/千分表
20 accessories for dial test indicators  杠桿百分表/千分表附件
21 pocket type dial test indicators 袖珍型杠桿百分表/千分表
22 accessories  for pocket type dial test indicators  袖珍型杠桿百分表/千分表附件

高度尺類:
1 Linear Height 2D測量儀
2 QM-Hite 高精度數顯高度尺
3 heightmatic 高精度高度尺
4 digimatic heitht gages 數顯高度尺
5 digital counter type dial heitht gages  帶表帶計數器型高度尺
6 dial height gages  帶表高度尺
7 vernier height gages  游標高度尺
8 scribers for height gages/accessories for height gages  高度尺劃線頭及高度尺附件

Example of calibration certificate
校準證書例子

The calibration certificate can be customized and printed in many different languages
校準證書可用許多不同的語言定制和印刷。

More information about update options for other length measurement machines can be found on (暫不可見) or (暫不可見)
如需更多其他長度測量儀器的最新消息奴迅，請訪問： (暫不可見)或(暫不可見)

聲明：本網站所收集的部分公開資料來源于互聯網青责，轉載的目的在于傳遞更多信息及用于網絡分享，并不代表本站贊同其觀點和對其真實性負責取具，也不構成任何其他建議脖隶。本站部分作品是由網友自主投稿和發布、編輯整理上傳暇检，對此類作品本站僅提供交流平臺产阱，不為其版權負責。如果您發現網站上所用視頻占哟、圖片心墅、文字如涉及作品版權問題，請第一時間告知谴童，我們將根據您提供的證明材料確認版權并按國家標準支付稿酬或立即刪除內容辖京，以保證您的權益！聯系電話：010-58612588 或 Email:editor@mmsonline.com.cn整雷。